La Cafetière à Piston Signature en Acier Inoxydable
350 ml
$209.00
Prix promotionnel
$209.00
Prix régulier
$289.00
Passer aux informations sur le produit
La Cafetière à Piston Signature en Acier Inoxydable
Double-wall 304 steel · plastic-free brew path · stays hot
$209.00
Prix promotionnel
$209.00
Prix régulier
$289.00
Grounds in. Water over. The double-wall steel sits cool to the touch while the coffee inside stays hot. Press when ready.
The Signature Stainless Steel French Press is built from double-wall 304 stainless steel with a mirror-polished finish that holds brewing heat without warming the outer surface. A two-part plunger pairs a fine mesh screen with a perforated steel plate, so the grounds stay down and the oils that give French press its full body come through. Inside, an etched cup and ounce gauge lets you pour to the line. Three sizes, from a single-serve 350 ml to a 1 L pot for the table. No plastic, no BPA, no compromise.
The insulation does the work. The steel just gets out of the way.
Discover more
Specifications
Body
Double-wall insulated 304 stainless steel
Finish
Mirror-polished, inside and out
Lid & handle
Knobbed steel lid · stay-cool tubular handle · anti-drip pour spout
Filter
Two-part plunger · fine stainless mesh screen with perforated press plate
Markings
Etched cup & ounce fill gauge inside the body
Heat retention
Double-wall insulation keeps coffee hot, exterior cool
Use
Coffee, loose-leaf tea, cold brew
Sizes
350 ml (serves 1-2) · 800 ml (serves 2-4) · 1 L (serves 4-6)
In the box
French press with lid & dual-screen plunger (1)
Materials safety
BPA-free, food-grade throughout
Sizes & dimensions
SizeServesHeightBase width
350 ml1-2 cups16.3 cmØ 7.6 cm
800 ml2-4 cups17 cmØ 8.9 cm
1000 ml4-6 cups22.1 cmØ 10.4 cm
Heights measured with the plunger raised. The largest press weighs just over 500 g.
Brew ratios
A good place to start is 1:16 by weight, one part coffee to sixteen parts water. Medium-coarse grind. Four-minute steep. Steady press, no force.
SizeCoffeeWater
350 ml21 g350 ml
800 ml50 g800 ml
1 L63 g1000 ml
Water temperature: 93 °C. Ten seconds off the boil.
Care & maintenance
Stainless steel resists staining, but coffee oils accumulate. A regular rinse keeps the flavor clean.
- After each brew: Discard grounds, rinse the mesh screen under warm water. The double-wall build keeps the body cool enough to handle right away.
- Weekly deep clean: Unscrew the plunger, separate the mesh screen and press plate, soak in warm soapy water for ten minutes, scrub gently with a soft brush.
- Polish preservation: Dry the exterior with a soft cloth after washing to keep the mirror finish bright. Avoid abrasive pads or harsh chemicals.
Frequently asked
What does double-wall insulated mean?
The body has two steel walls with an insulating gap between them that slows heat transfer. Your coffee stays hot longer while the outside stays cool to the touch.
How good is the filter?
The plunger has two parts working together: a fine stainless mesh screen backed by a perforated press plate. Together they hold the grounds down and let the coffee oils through, for a full-bodied cup with minimal sediment.
What is it made of?
Food-grade 304 stainless steel, inside and out, with a mirror-polished finish. It resists corrosion, will not react with coffee oils, and keeps plastic out of your brew.
Which size should I choose?
The 350 ml makes one large mug or two small cups (1-2 people). The 800 ml serves two to four. The 1 L fills four to six cups for a small gathering. The etched cup gauge inside makes it easy to pour to the right amount, and the double-wall insulation keeps it hot as you go.